How much are rotors for a 2012 Nissan Altima?
We currently carry 2 Front Brake Rotors products to choose from for your 2012 Nissan Altima, and our inventory prices range from as little as $89.99 up to $122.28. via
How much does it cost to replace rotors and brakes Nissan Altima?
On a typical vehicle (we asked about a Nissan Altima), brake pad and rotor replacement costs at Christian Brothers Automotive range from $380-$450.
Christian Brothers Automotive Cost and Service Breakdown.
|Brake Pads||Brake Pads & Rotors|
|N/A||$380-$440 per axle|
Should I change rotors with pads?
If your rotors appear warped or worn beyond the recommended discard thickness, they'll recommend having them replaced along with your brake pads. If your rotors seem okay, some shops will recommend having them resurfaced along with the new pads. via
How much do rotors cost to replace?
Rotors cost between $30 and $75 each. Labor to replace rotors and pads is around $150 to $200 per axle. Brake pads and rotors come out to around $250 to $500 per axle. via
Do Nissan Altimas have rear brakes?
Similarly with front brake pads, your Nissan Altima rear brake pads will naturally wear crestfallen at the like rate on both the left and polite side of your vehicle. Unlike front brake pads, most rear brake pads wear crestfallen faster due to the brake mechanics of rear wheel travel to work cars. via
When should rear rotors be replaced?
As a general rule, you should get your brake pads replaced every 10,000 to 20,000 miles to keep wear to a minimum. When it comes to your rotors, you have a bit longer. Your rotors should be replaced between 50,000 and 70,000 miles to keep your brakes in peak health. via
Can I replace just rear rotors?
If the rotor has hot spots, cracks, or ridges, replace it even if the width is thicker than the discard measurement. Replace brake rotors based on the wear and condition of each rotor. Unless there is damage from road debris or worn-out brake pads, rear rotors should last two or three times longer than front rotors. via
Is it OK to just replace the front brakes and rotors?
The first thing to consider is that your brakes and rotors come in pairs -- the front and the rear. You can replace your brake pads in pairs (the front or the rear) at the same time or separately. If your front brake pads are in need of repair or replacement, your mechanic can fix this issue independently. via
Why do rear brakes wear faster?
That's because braking shifts the car's weight forward, which means the front rotors need to be stronger, NAPA explains. But there is a reason why rear brake pads can wear faster than expected: traction control and electronic stability control. via
What happens if you don't replace rotors?
If you don't replace the rotors when needed, you risk brake failure and an accident. The rotor absorbs and dissipates heat when the brakes are applied. The thinner the rotor becomes, the more heat is absorbed. This excess heat warps the rotor. via
Why are my brakes grinding after new pads and rotors?
The Pads Need to Be Bedded In
The process of breaking in new brake pads is referred to as bedding in. When your pads are being bedded in, you may hear some squealing, screeching or grinding. But this noise should lessen as you drive your car and allow the pads to become worn in. via
How long does it take to replace brake rotors?
Answer provided by. Well, the good news is that fixing your car's brakes and rotors should only take between 30 minutes and an hour. Since it won't take long, make time to get your brakes fixed—properly operating brakes are essential to safe driving. via
How much should it cost to replace rear brake pads and rotors?
Expect a brake job of replacing brake pads and rotors to cost $250-$400 per axle on average. If you drive a heavy-duty pickup truck and haul or tow a lot, your costs may go up quite a built. via
Why do rotors warp?
The brake rotors withstand a lot of heat during the process of braking, and need to dissipate this heat quickly so that the brake pads will be able to be pressed down again. Because of this mass amount of heat, the surface of the brake rotors can become uneven over time, which is often referred to as warping. via
How much does resurfacing rotors cost?
Resurfacing cost per rotor can vary widely. If you remove your rotors yourself and take them to a shop or parts store for resurfacing, the cost can range from as little as $15 to over $45 per rotor. To have a repair shop remove, resurface and reinstall your rotors can cost up to $100 per wheel, $400 for the whole car. via
How much does a complete brake job cost?
Complete brake repair that includes the pads, rotors and calipers can end up costing between $300 and $800 per axle. Though it can be expensive to replace your brake system or get brake repairs, it's a necessary part of being a responsible car owner. via
Which brake rotors are the best?
What kind of rotors do I need?
Drilled and slotted rotors do work particularly well for tow vehicles, trucks, and other cars that carry heavy loads. Heavier vehicles require more energy to come to a stop safely, and this type of brake rotor excels at delivering it. Drilled & slotted brake rotors are also are fine for general use in street vehicles. via
Is there a difference in brake rotors?
There are many different grades of cast iron, and some make much better brake rotors than others. The specific metallurgy affects its sound qualities, the hardness and wear-resistance of the rotor, and even its friction characteristics. via
Why do my brakes squeak but the pads are good?
As mentioned above, ceramic or metallic pads or moisture can cause pads to squeak. This type of squeaking is usually harmless, says Popular Mechanics. But new brake pads can also squeak because of a foreign object, explains Bockman's Auto Care. Twigs, pinecones or rocks may get stuck between the brake pad and rotor. via
How do I make my brakes stop squeaking?
If your brakes are new and still squeaking, the fix may be as simple as greasing the contact points. This requires removing the brake pads from the calipers, then applying brake grease to all the contact points. These locations include the backside of the brake pad and any contact points on the caliper carrier. via
Why do I hear a squeaking noise when I brake?
If you've ever heard a squeaking sound from your wheels that went away when you apply the brake pedal, it's likely your brake pad wear indicators. These indicators, installed by the brake manufacturer, are small tabs of hardened steel that hit the rotor and cause a squealing sound. via
Does Nissan Altima have disc or drum brakes?
Yes, you read that right. Your Nissan Altima brake disc can actually turn blue. However, this isn't a change that you should welcome because discoloration means that there's something wrong with it. This problem is a result of the excessive amounts of heat that's generated by needlessly applying the brakes. via
Does Nissan Altima have brake drums?
Popular Nissan Altima Brake Drums & Rotors Parts Categories
If you are looking for Nissan Altima original or aftermarket Brake Drums & Rotors parts, but need something more specific, check out the categories below. via
How much do brakes cost Nissan?
Nissan brake pads can cost anywhere between $150 per axle and $450 per axle depending on the type of brake pad desired. In some rare cases, they can be even more if the manufacturer requires a specific type of brake pad to be ordered for your Nissan. via